Cultivator

Cultivator

Complete range for all type of tillage

Chisel tines

High elasticity and recovery of the initial geometry

Characteristics:

•Special, high elasticity steel with high capacity to recover initial geometry.

•Specific integral heat treatment that provides each material with optimum characteristics.

Use:

•Working in dry soil is recommended.

•A working depth of from 18-22 cm is recommended.

•The recommended power is between 25 and 40 hp per metre of working width.

•Working speed should be high (7 to 9 km/h) to improve efficiency.

Bellota Catalogue

Download catalogue

2461-2467

2461 - 2467

Chisel Tine Bellota Agrisolutions

Ref.	G	A	B	C	D	E	F	Grs.	B	D
2466	25x25	393	370	17,5	45	M12	217	3500	200
2466-E	25x25	361	315	15	45	M12	135	2700	300	100
2466-E TL	25x25	361	315	14,5	45	M12	135	2700	200	100
2467	30x30	470	397	17	45	M12	275	5500	125
2467-35	35x35	470	402	17	45	M12	275	7500	125
2467-35 TL	35x35	495	450	16,5	45	M12	244	8000	125
2467-35-A-L	35x35	452	522	20	45	M12	215	8800	100	100
2461-C	40x30	495	368	18,5	40-50	M12	296	6900	90
2461-CL	40x30	470	492	26	45	M12	215	9620	70
2464-A	40x40	470	500	26	45	M12	245	11000	50
2464-AL	40x40	525	575	26	45	M12	230	12700	30
2464-AL CA1	40x40	525	575	26	57-57	M12	230	12700	30	100
2461-B	45x20	500	355	17	40-50	M12	296	5200	100
2461-D	45x20	415	450	17	40-50	M12	280	6200	100	100
2462-A	50x25	450	582	21,5	40-50	M12	280	10300	45
2462-B	50x30	455	587	21,5	40-50	M12	280	12500	40
2462-B-A16	50x30	545	660	17	56	M12	330	14150	35	100
2462-B A24 CA2	50x30	455	587	26	45-57	M12	280	12500	40	100
2462-C	50x30	560	480	20	57	M14	330	11700	80	100

D Right
D Articles manufactured upon order

2464-AL CA1: With three holes to mount Mulch-Mix cultivators.

TL: with lateral hole

2467V

2467-V

Chisel Tine 2467 Bellota Agrisolutions

Ref.	G	A	B	C	D	E	F	G	Grs.	B	D
2467-V D	30X30	470	395	17	45	M12	305	200	5800	90
2467-V I	30X30	470	395	17	45	M12	305	200	5800	90
2467-35 V D TL	35x35	495	450	16,5	45	M12	244	200	9100	80	100
2467-35 V I TL	35x35	495	450	16,5	45	M12	244	200	9100	80	100

I Left
D Right
D Articles manufactured upon order

V: Models specially designed for vineyard

2467-35 V TL: with lateral hole

2811

2811

Chisel Tines 2811 Bellota Agrisolutions

2811 A

Chisel Tines 2811-A Bellota Agrisolutions

2811 B

Chisel Tines 2811-B Bellota Agrisolutions

Ref.	G	A	B	C	D	E	F	Grs.	B	D
2811-A	45X15	254	408	17	45	M10		3800	120	100
2811-B	45X15	369	490	17	45	M10	272	5300	120	100
2811-B-CA1	45x15	369	490	17	45	M10	272	5300	120	100
2811-R	45X10	521	163	17				1950	500	100

D Articles manufactured upon order

2811-A installed with an inclination of 20º

2811-B: 2 mounting screw holes. 40 mm distance between holes of 17 diameter

Tables of reference

2461-2467 • 2467V • 2811

Searcher

Make a query