Double coil tines
High elasticity and recovery of the initial geometry
•Special, high elasticity steel with high capacity to recover initial geometry.
•Specific integral heat treatment.
•Epoxy paint with UVA protection.
Use:•Working in dry (friable) soil is recommended and they are very suitable for seedbed preparation in non-demanding crops (for example, barley and wheat etc).
•A maximum working depth of between 15 and 25 cm is recommended
•The required power is between 19 and 23 hp/m
Epoxy paint with UVA protection.
2480
2480V - 2485V
Ref. | G | A | B | C | D | E | F | G | M | Grs. | B | F | D |
2480 D | 20x20 | 370 | 395 | 92 | 13 | 45 | 63 | M10 | 4400 | 200 | 12480 | ||
2480 I | 20x20 | 370 | 395 | 92 | 13 | 45 | 63 | M10 | 4400 | 200 | 12480 |
D Right
D Articles manufactured upon order
Clamps.
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR
Models specially designed for vineyard
2481-H
2481-FM
2480V - 2485V
Ref. | G | A | B | C | D | E | F | G | M | Grs. | B | F | D |
2481 D | 25x25 | 425 | 468 | 120 | 15 | 45 | 79 | M12 | 8950 | 95 | 12481 | ||
2481 I | 25x25 | 425 | 468 | 120 | 15 | 45 | 79 | M12 | 8950 | 95 | 12481 | ||
2481-B D | 25x25 | 390 | 468 | 120 | 17 | 60 | 79 | M12 | 8950 | 100 | 12481 | 100 | |
2481-B I | 25x25 | 390 | 468 | 120 | 17 | 60 | 79 | M12 | 8950 | 100 | 12481 | 100 | |
2481-H D | 25x25 | 450 | 395 | 118 | 17 | 33 | 80 | M10 | 9000 | 90 | 12481 | 100 | |
2481-H I | 25x25 | 450 | 395 | 118 | 17 | 33 | 80 | M10 | 9000 | 90 | 12481 | 100 | |
2481-FM D | 25X25 | 90 | 530 | 130 | 45/51 | 95 | M12 | 10000 | 100 | 12481 | 100 | ||
2481-FM I | 25X25 | 90 | 530 | 130 | 45/51 | 95 | M12 | 10000 | 100 | 12481 | 100 |
D Right
D Articles manufactured upon order
Clamps.
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR
2499 D/I C2A fits with 1529-A6
Models specially designed for vineyard
2483
2480V - 2485V
Ref. | G | A | B | C | D | E | G | M | Grs. | B | F |
2483 D | 27x27 | 437 | 480 | 127 | 17 | 45 | 85 | M12 | 10500 | 80 | 12483 |
2483 I | 27x27 | 437 | 480 | 127 | 17 | 45 | 85 | M12 | 10500 | 80 | 12483 |
2483-R22 D | 27x27 | 437 | 480 | 127 | 23 | 45 | 85 | M12 | 10500 | 80 | 12483 A22 |
2483-R22 I | 27x27 | 437 | 480 | 127 | 23 | 45 | 85 | M12 | 10500 | 80 | 12483 A22 |
D Right
F Articles manufactured upon order
Clamps.
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR
Models specially designed for vineyard
2484
2484 GD
Ref. | G | A | B | C | D | E | G | M | Grs. | B | F | D |
2484 D | 30x30 | 496 | 498 | 145 | 21 | 45 | 95 | M12 | 14200 | 60 | 12485 | |
2484 I | 30x30 | 496 | 498 | 145 | 21 | 45 | 95 | M12 | 14200 | 60 | 12485 | |
2484 D GD | 30x30 | 360 | 625 | 360 | 15 | 45 | 95 | M12 | 15000 | 60 | 12485 | 100 |
2484 I GD | 30x30 | 360 | 625 | 360 | 15 | 45 | 95 | M12 | 15000 | 60 | 12485 | 100 |
D Right
D Articles manufactured upon order
Clamps.
2484 GD: water based painting
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR
2485
2480V - 2485V
Ref. | G | A | B | C | D | E | F | G | M | Grs. | B | F | D |
2485 D | 32x32 | 438 | 508 | 155 | 23 | 45 | 101 | M12 | 17000 | 50 | 12485 | ||
2485 I | 32x32 | 438 | 508 | 155 | 23 | 45 | 101 | M12 | 17000 | 50 | 12485 |
D Right
D Articles manufactured upon order
Clamps.
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR
Models specially designed for vineyard
2486-GD
Ref. | G | A | B | C | D | E | G | M | Grs. | B | F | D |
2486 D GD | 35x35 | 400 | 583 | 145 | 23 | 45/70 | 110 | M12 | 22000 | 40 | 12486 | |
2486 I GD | 35x35 | 400 | 583 | 145 | 23 | 45/70 | 110 | M12 | 22000 | 40 | 12486 | |
2486 CD GD | 35x35 | 410 | 600 | 145 | 17 | 50/75 | 110 | M12 | 22000 | 40 | 12486 | 100 |
2486 CI GD | 35x35 | 410 | 600 | 145 | 17 | 50/75 | 110 | M12 | 22000 | 40 | 12486 | 100 |
D Right
D Articles manufactured upon order
Clamps.
2486 C GD: water based painting
See possible assemblies on page See ASSEMBLY DOUBLE COIL TINE - CULTIVATOR