Concave Discs

Allows tillage a higher speed.

These blades are for Vertical Tillage and are recommended for soft soils as it cuts waste perfectly and it penetrates deeply into the ground.

Furthermore, as the blade gradually wears down, it becomes more aggressive, thus guaranteeing a longer working life for the disc.

Vertical tillage disc, that is, to work the soil without turning it over, to avoid mixing the various layers of soil.

A good cut and an ideal mix of the organic residue is achieved, protecting the soil from erosion.

But under the soil you obtain a soil well prepared for planting, completely oxygenated and aerated to allow roots to grow in perfect conditions.

Vertical tillage disc, that is, to work the soil without turning it over, to avoid mixing the various layers of soil.

A good cut and an ideal mix of the organic residue is achieved, protecting the soil from erosion.

But under the soil you obtain a soil well prepared for planting, completely oxygenated and aerated to allow roots to grow in perfect conditions.

Vertical tillage disc, that is, to work the soil without turning it over, to avoid mixing the various layers of soil.

A good cut and an ideal mix of the organic residue is achieved, protecting the soil from erosion.

But under the soil you obtain a soil well prepared for planting, completely oxygenated and aerated to allow roots to grow in perfect conditions.

Penetraits better in dry soil but it also have a good performance in humid soil.

Allows tillage a higher speed.

Thanks to the design of the KIRAI blades, the penetration into the soil is deeper than in traditional disc blades without increasing the tractor power.

LUR discs have been devised to carry out tillage aggressively and energetically to shred and mix even the most resistant residue.

They penetrate more deeply into dry soils than into normal soils, a working depth ranging from 15 to 25 cm being considered advisable.

They are aslo highly effective at a shallower depth when tilling in wet soils.

It is advisable to assemble these discs helicoidally in each socket in order to put the rotation of the assembly to best use, so that the rotation power of the set is improved.

As the hole is square, it is simply a question of turning one position with respect to the preceding disc.

Recommended for soft soils.

The disc has a better lifetime than the conventional notched disc.